Raider RDI-ID39, User Manual

Page: 10 / 74

10 www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following
instructions can cause electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit. Disarray and
poor lighting may contribute to the occurrence of an accident.
1.2. Do not operate in an environment where the impact drill
with an increased risk of an explosion in the vicinity of flammable
liquids, gases or powders.
During operation of the impact drill can be separated sparks
that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe distance while
working with the impact drill.
If your attention is diverted, you may lose control over the
impact drill.
2. Safety when working with electricity.
2.1. Plug of the impact drill must be suitable for contact. In no
case is allowed to modify the structure of the plug. When working
with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric
shock.
2.2. Avoid touching your body to earthed bodies, eg. pipes,
heaters, stoves and refrigerators. When your body is grounded,
risk of electric shock is greater.
Protect your impact drill from rain and moisture.
Penetration of water into the impact drill increases the risk
of electric shock.
2.3. Do not use a power cord for the purposes for which it is
not provided, eg. to bear the impact drill for cable or removing
the plug from the outlet. Protect cords from heat, oil, contact with
sharp edges or points of mobile machines.
Damaged or twisted cables increase the risk of electric
shock.
2.4. When working with drill impact out, switch the machine
only in installations equipped with electric switch Fi (safety shut-
off switch with Residual protection), and current leakage, which
is triggered when DTZ must be no more than 30 mA, according
to “Regulation 3 device for the electrical equipment and power
lines. Use only extension, suitable for outdoor use. Using the
extension, designed for outdoor use reduces the risk of electric
shock.
2.5. If you require the use of the impact drill and in moist
environment, plug the machine only in installations equipped with
electric switch Fi. Use of such a safety switch utechni currents
reduces the risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions carefully and act
cautiously and prudently. Do not use the impact drill, when you
are tired or under the influence of drugs, alcohol or narcotic
drugs.
A moment of distraction at work impact drill may have the
effect of extremely serious injuries.
3.2. Work with protective work clothing and always with
safety glasses.
Wearing suitable for drilling and the activities of personal
protective equipment, such as respiratory masks, healthy,
tightly closed shoes grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk of accident.
3.3. Avoid the danger of incorporating the impact drill
inadvertently. Before you turn the plug into the power supply
network, make sure the trigger switch is in position “off”. If, when
you carry the impact drill, keep your finger on the trigger switch,
or if you submit a voltage of the impact drill, where it is included,
there is the risk of accident.
3.4. Before you turn on the impact drill, make sure that you
have removed all of her utilities and wrenches.
Utilities, forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work in a stable
position of the body at any time and keep the balance. So
you can control the impact drill better and safer if unexpected
situations arise.
3.6. Work with appropriate clothing. Do not operate with
loose clothing or ornaments. Keep your hair, clothes and gloves
at a safe distance from rotating units of the impact drill. Robes,
attire, long hair can be caught and carried away by chuck.
3.7. If possible use an external aspiration system, make sure
it is switched on and functioning properly. Use of the aspiration
system reduces the risks due to the discharge dust at work.
4. Care to drill to hit.
4.1. Do not overload the impact drill. Use only the impact drill
in accordance with its intended purpose. Will operate better and
safer when using the appropriate impact drill manufacturer in the
specified range of load.
4.2. Do not use impact drill, whose starting switch is
damaged.
Impact drill, which can not be excluded and included as
provided by the manufacturer, is dangerous and must be
repaired.
4.3. Before you modify the settings of the impact drill, working
to replace instruments and ancillary devices, and for a long time
when you will not use the impact drill, unplug the plug from the
supply network. This measure eliminates the danger of triggering
of the impact drill inadvertently.
4.4. Keep impact drill in places where they could not be
reached by children. Do not let it be used by persons who are
not familiar with how to work with it and have not read those
instructions. When in the hands of inexperienced users, the
impact drill can be extremely dangerous.
4.5. Keep your impact drill carefully. Check whether the
mobile units operate impeccable, whether it spells, if there is
broken or damaged items which distort or alter the functions of
the impact drill. Before using the impact drill, make sure that the
damaged parts to be repaired. Many accidents are caused by
poorly maintained power tools and appliances.
4.6. Keep your cutting tools well sharpened and always
clean. Properly maintained cutting tools with sharp edges have
less resistance and working with them easier.