Raider RD-T12, User Manual, Page: 24 / 94

24 www.raider.bg
SAFETY INSTRUCTIONS:
This machine can cause serious injury (such as a limb break) and throw objects. Failure to comply with safety
rules can result in serious injury.
• Only one person can operate the machine.
• Always ensure good slope stability.
• Move the machine to a working step.
• The following applies to wheeled machines: Continue to follow during operation
contour lines, never up or down.
• Be especially careful when turning the machine or pulling it towards you.
• Greater attention should be paid to places where the soil is rocky and hard. Under these conditions, there is
a risk of injury or damage to the machine by throwing stones, clods, and the like.
• The machine must not be lifted or transported while the engine is running. Turn it off
the machine when changing the work area and wait until the blades of the cultivator are at rest.
• Never use the machine with damaged protective devices or covers or missing,
modified or disabled safety systems.
• Do not operate a damaged, incomplete or repaired machine.
• If you hit a foreign object, stop the machine. Allow engine to cool off candle plug and check for damage to the
machine. The machine must be repaired before starting and reusing it.
• If abnormal vibration or abnormal sound is heard during operation, stop the machine and determine the
cause. Vibrations usually indicate a malfunction. Repair them before using them again.
• If you are using the machine for the first time or after repair, it is necessary to perform a test run to see if there
are any unusual reactions. This avoids the risk of injury or damage to the machine.
• Never leave the machine unattended at work.
• Switch off the engine each time you exit the machine.
• Do not try to repair it yourself. Any work not mentioned in this manual,
should only be performed by authorized service centers.
PREPARATION:
Inspect the machine, make sure it is in good condition, and check that all screws, nuts, and other fasteners
are properly secured. Replace illegible labels.
• Keep all fuses and deflectors in good working order.
• Remove accumulated debris from the exhaust area and cylinder area. Check it out the silencer for cracks,
corrosion or other damage.
• Before each use, inspect the machine to determine if it is working tools worn or damaged. Replace worn or
damaged parts.
• Do not operate a damaged, incomplete device, or a device set up without the consent of manufacturer.
Never use the device with defective protective equipment. Before use, check the condition of the appliance,
especially the power connections, switches and protective covers.
WORKING ENVIRONMENT:
• Do not operate in an explosive atmosphere, such as in the presence of flammable liquids, gases or dust.
The product creates sparks that can ignite dust or fumes.
• Check the terrain on which you will use the machine and remove any objects that
can be caught, entangled or discarded (stones, pieces of glass, nails, wires, toys, sticks, etc.). Only operate
the machine on a safe surface and in good light!
• Never use the machine during rain and storms, especially if there is a risk of lightning.
• Never use the machine on a slippery surface.
• Keep children and bystanders away while operating the machine. Distraction can lead to loss of control.
• While working, make sure you stand firm. Be especially careful when working on sloping terrain.
USE OF GASOLINE MACHINES:
• Never use brute force when operating gasoline machines. The machine that is Designed for work, it performs
better and more securely, so always use the right machine for a task.