Raider RD-T11, User Manual

Page: 32 / 130

32 www.raider.bg
WARNING
To ensure safe operation
For safety of you and other. Please pay special attention to these precautions.
Keep your hands and feet away
from the parts when using the
machine.
Keep bystander away from the
machine
Keep this machine stabilization
when leaving
Read the instruction carefully
before using the machine
Make sure that the blade and safety protection
board are securely fastened and correctly
assembled before using the machine
High temperature part, don’t touch it
Operator Responsibility
Keep the tiller in good operating condition. Operating a tiller in poor or questionable condition could
result in serious injury.
Be sure all safety devices are in working order and warning labels are in place. These items are
installed for you safety.
Be sure the safety covers (Fan cover, recoil starter cover) are in place.
Know how to stop the engine and tines quickly in case of emergency. Understand the use of all
controls.
Keep a firm hold on the handlebars, they may tend to lift during clutch.
APPLICABLE SCOPE
The micro-tiller is suitable for cultivating the sandy soil and clayey soil of canopied vegetables base
and dry land, slopes with gradient less than 10%, paddy field with the depth of water surface to hard
layer not more than 250mm.
For weedy and deep plots, remove the weeds before using the micro-tiller to cultivate the land.
PRE-OPERATION CHECK
Caution! Never start the engine until all the above measures under ASSEMBLY have been carried out.
Some machines are delivered without oil in the engine. Fill the engine with oil before using.
6.1 Fill engine oil
6.1.1 Place the machine on a level floor.
6.1.2 Loosen the dipstick (see followed picture) and fill with oil up to the FULL level.
（
1
）
(1) OIL FILLER HOLE
(2) FULL LEVEL
(3) LOWER LEVEL