Raider RD-RW01, User Manual

Page: 20 / 118

20 www.raider.bg
the electronic protection system and battery cells. Beware of the electrostatic charge and never touch the
battery poles.
Safety conditions when operating the charger:
Before charging the charger, all relevant information and information contained in this instruction manual as
well as the charger and battery charging instructions for this charger must be read.
1. To reduce the risk of personal injury and injuries, the charger must only be used to charge lithium-ion
type batteries. Other types of batteries may explode, cause serious injuries or other material damage.
2. Do not expose the charger to the influence of moisture or water.
3. The use of connecting, non-recommended or non-sold items by the charger manufacturer may cause a
fire, cause personal injury or electric shock.
4. The power cord should not be inserted. It should not be in a passage where people pass and should not
be subjected to any other danger (for example too much tension).
5. If there is no need, do not use an extension. Using an inappropriate extension may cause a fire or
electric shock. If using an extension cord is necessary, first make sure that the extension of the extension
extends to the pins of the original power supply plug.
6. The extension must be in the proper technical condition.
7. Do not use the charger with a damaged power cord or plug. The fault must be removed by a qualified
person.
8. Do not use the charger if it has been subject to a strong shock, fall or has been damaged in any other
way. Verification and eventual repair must be entrusted to an authorized RAIDER service center.
9. Disconnection attempts on the charger are not allowed. All repairs should be entrusted to an authorized
RAIDER service center. Incorrect installation of the charger will cause an electric shock or fire.
10. Before proceeding with any service or cleaning the charger, it must be disconnected from the mains.
11. Disconnect the charger from the mains when not in use!
Charger information and charging process.
1. Please see the data marked on the charger label. Make sure you connect the charger to the power
supply with the voltage indicated on the nameplate. Never connect the charger to a network of different
voltages.
2. Protect the charger and its cable from damage and sharp edges. Damaged cables must be repaired
immediately by a qualified electrician.
3. Keep the charger out of the reach of children.
4. Do not use damaged chargers.
5. Do not use the supplied charger to charge other rechargeable batteries.
6. The present charger is not intended for use by persons (including children) with limited physical, sensory
or mental capabilities or for persons without experience and knowledge of the equipment unless the
use is monitored or in accordance with the instruction manual for the device, transmitted by the persons
responsible for safety. Care must be taken not to play with equipment.
7. Do not expose the charger to moisture or water. The entry of water into the charger increases the risk of
electric shock. The charger can only be used indoors in dry rooms.
8. Before you perform any maintenance or cleaning of the charger, you must disconnect the charger from
the power supply.