11
EN
Original instructions for use
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric
and pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and
reliable machines and work with them will deliver a real pleasure. For your convenience has
been built and excellent service network of 45 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions’ manual”.
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and
accidents, it is important that these instructions will remain available for future reference
to all who will use the machine. If you sell it to a new owner “Instructions’ manual” must
be submitted along with it to enable new users to become familiar with relevant safety and
operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and
owner of the trademark RAIDER.
Address: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel 02 934 33 33, 934 10 10,
www.raider.bg; www.euromasterbg.com; e-mail: [email protected].
Since 2006 the company introduced the system of quality management ISO 9001:2008
with scope of certification: Trade, import, export and servicing of hobby and professional
electrical, mechanical and pneumatic tools and general hardware. The certificate was issued
by Moody International Certification Ltd, England.
Technical Data
parameter
unit
value
Model
-
RD-OMT01
Rated voltage
V
230
Frequency
Hz
50
Rated power input
W
280
Oscillations at 3.2 аngular degrees
min
-1
11000-20000
Sound pressure level LpA
dB(А)
92, K = 1.5
Sound power level LwA
dB(А)
103, K = 1.5
Vibration emission value a
h
m/s
2
8.8, K = 1.5
Protection class
-
II
Product Features:
1. ON/OFF switch.
2. Speed control dial.
3. Hex key holder.
4. Air Vents.
5. Accessory holder.
6. LED light.
7. Caps to change the brushes.
8. Hex key.
9. Segmented saw blade.
10. Plunge-cut saw blade.
11. Sheet of sandpaper (rough).
12. Sheet of sandpaper (fine).
13. Sanding pad.
Summary of Contents for RD-OMT01
Page 63: ...63 Exploded drawing of Oscillating multi tool RD OMT01 ...
Page 79: ...79 ...
Page 83: ...83 ...
