14
www.raider.bg
Make sure the extension cord is away from the blade of the mower and the area to mow. Then plug the
other end of the extension in the sockets 220 V. Machines with rated supply voltage 230 V can work
included in the electric supply 220 V.
3.6. Turn on the electric lawn mower by pressing the safety button against inadvertent switching on
and push the lever on the switch to the handle. Submit safety button. Never operate the mower if it is in
the high grass.
3.7. Switching off the electric lawn mower by release the lever of the On/Off switch and necessarily wait
for the cutting blade to stop rotating!
Do not switch the mower immediately after you turn it off.
4. Practical tips:
4.1. Follow local regulations for the time of day during which you can use machines outdoors. In some
countries prohibit mowing morning before 08.00 hours, in the afternoon between 2:00 p.m. to 16:00 hours
and after 22:00 at night, to protect citizens from unwanted noise.
4.2. Often lawns are composed of grasses of different varieties. With frequent mowing you will boost
the growth of those species, which form dense sward and strong roots. If you mow your lawn frequently
will strengthen and improve the development of high - growing grasses and weeds. The normal height of
the grass is about 4-5 cm. Better to plan the frequency of mowing a lawn that can reduce up to 1/3 of the
total height of the grass. If you do not irrigate your lawn, mow grass lower than 4 cm, since a potential
drought it will degenerate.
4.3. Mow the lowest height (25 mm) only if your lawn area is very flat, expect heavy rains or will leave
on vacation.
4.4. The average height of mowing (40 mm) is best when the interval between the previous and the
next mowing are not lengthy.
4.5. Cutting height (55 mm) is suitable for the first mowing of the season and when there is a drought.
4.6. Empty the container for collecting grass clippings after filling 2/3 of its volume, this will provide a
more efficient mowing and prevent the mower from overloading.
4.7. When working in very difficult conditions not to overload the motor. When reloading the rotational
speed of the motor drops and noise is changed. In this case, stop, release the lever to include ( 1 ) and
set higher mowing height. Otherwise, performance will be reduced and the machine may be damaged.
4.8. When cutting close to edges careful not to pinch the mower foreign objects.
4.9. Cutting performance depend on the density, moisture content, length of the grass and the cutting
height. Cutting performance decreases with frequent switching on and off the mower while mowing. To
optimize the performance of the cutting recommended frequent cutting, increasing the height of the cutting
operation and at a moderate speed.
5. Servicing, maintenance and storage.
ATTENTION! Always disconnect the plug from the wall outlet before making activities related to
maintenance or cleaning! Once the machine is off, the blade continues to rotate for some time by inertia!
Before you start working on the mower, wait for the rotation of the motor and the blade to stop completely!
Never try to stop the rotation of the knife!
When you need to perform operations in the vicinity of the knife, always operate with gloves!
Perform maintenance procedures regularly to ensure your long-term and reliable use of the mower.
Check it periodically for visible defects such as loose or damaged knife and loosened screw connections.
Make sure the covers and guards are undamaged and are installed properly.
5.1. Cleaning.
The easiest way to clean the mower immediately after mowing. After working on the machine clean
thoroughly with a soft brush and cloth. Do not use water and / or solvents and detergents. Remove all
particles of grass, especially from vents. Place the machine on its side and clean the area of the blade.
Always wear protective gloves! Remove firmly adhering particles of wood or plastic block.
5.2. Sharpening or replacing the cutting blade.
Replace dull or damaged knives. Knife down and unscrew the main bolt in the center of the blade
spanner 27. Before inserting a new blade or after you have sharpened the old one, make sure the blade
is installed properly. Then tighten the bolt again and make sure that no gaps and the knife is properly
installed. Use only suitable for mower blades.
5.3. Always thoroughly clean the mower when to leave it for longer storage. Especially in the winter.
Summary of Contents for RD-LM32
Page 38: ...38 www raider bg EXPLODED VIEW AND SPARE PARTS LIST ...
Page 52: ...52 www raider bg ...
Page 53: ...53 ...
