Raider RD-HTL04, User Manual

Page: 13 / 80

13
Not for use of the machine for activities other than its intended purpose!
3. Assemble the elements of battery brush cutter and commissioning.
Some parts of the cutter is dismantled in order to reduce the volume of the container during
transport.
Inserting / removing the battery
Remove the battery before any manipulation or cleaning the machine.
• Always release button on / off before inserting or removing the battery.
• To remove the battery, press the button at the end of the battery, then remove it from the tool.
• To insert the battery, slide the two grooves on both sides of the battery into the groove of
the housing and slide it into place. Always slide until it clicks into place. If you do not, it may
accidentally fall out of the tool and cause harm to you or someone around you.
Do not use force when inserting the battery. If the battery does not slide easily, it means that it
is not installed correctly.
4. Maintenance and Storage
4.1. After use, remove the battery from the cutter and check for damage;
4.2. When not in use store the machine within reach of children;
4.3. Use only the manufacturer’s recommended spare parts and accessories RAIDER;
Once the machine is turned off, the knife continues to move for some time by inertia! Before
working on the saw, wait for the rotation of the motor and blade to stop completely!
Never attempt to stop the rotation of the knife!
When you need to perform activities near the knife, work always with protective gloves!
Perform maintenance procedures regularly to ensure your long-term and reliable use of the
chainsaw. Check periodically for visible defects such as loose or damaged blade and loosened
screw connections. Make sure that the covers and safety equipment are in working and installed
correctly.
Cleaning tool, remove the battery and use mild soap and a damp cloth to clean the instrument.
Do not immerse the instrument in water and wash it with a hose. Do not allow any liquid to enter
inside it. Do not clean with high pressure cleaner.
5. Start the saw
5.1. Turn on:
- Press and hold the latch safety, which is located on the auxiliary handle (3).
- Press the switch (4).
5.2. Off:
Release either button.
5.3. Trimming hedges
Trapezoidal profile of the knife corresponds to the natural growth of plants and leads to optimal
hedging.
In order to promote dense growth of young hedges, only half of new shoots should be cut.
If a hedge has reached the desired height, new shoots can be completely removed.
Start trimming from the bottom of the bush to the top. Trim the top in your preferred form in a
straight horizontal shape, or a rounded roof.
If the blades are clogged or blocked, stop the engine, remove the battery and then remove the