10
www.raider.bg
1. General instructions for safe operation.
Read all instructions. Failure to follow the instructions may result in electric shock, fire and / or
serious injury. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep work area clean and well lit. Cluttered and inadequate lighting may contribute to the
occurrence of accidents.
1.1.2. Do not operate the brush cutter in an environment with increased danger of explosion,
close to flammable liquids, gases or dust.
During operation of the brush cutter can create sparks that can ignite the dust or fumes.
1.1.3. Keep children and bystanders away while operating a brush cutter.
If your attention be diverted, you may lose control of the brush cutter.
1.2. Safety when working with electricity.
1.2.1. The plug of the brush cutter must be suitable for use contact. In no case be allowed to
modify the plug. When working with zeroed appliances do not use adapters plug.
Unmodified plugs and sockets reduce the risk of electric shock.
1.2.2. Avoid body contact to grounded objects such as pipes, radiators, stoves and refrigerators.
When your body is grounded, the risk of electric shock is higher.
Protect the machine from rain and moisture.
Water entering a brush cutter increases the risk of electric shock.
1.2.3. Do not use the power cord for purposes for which it is provided. For example, to wear a
brush cutter for cable or unplug. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
1.2.4. When working with brush cutter outside, turn on the machine only in systems equipped
with circuit breaker Fi (switch for emergency shutdown with overcurrent protection), and current
leakage that triggered RCD must be no more than 30mA, according to the “Regulation 3 Planning
of electrical installations and power lines. “
If you must use an extension cord, note that you must select an extension to 15 meters with
a conductor cross-section 1.5 mm2. Extender should always be fully developed. Undeveloped
extension becomes coil. When working outdoors, use only extension cords suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
1.2.5. If you must use a brush cutter damp environment, connect the machine only in plants
equipped with electric-cal breaker Fi. The use of such a safety switch leakage currents reduces the
risk of electric shock.
1.3. Safe way of working.
1.3.1. Be alert, watch carefully their actions and act cautiously and wisely. Do not use the brush
cutter when you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating the brush cutter can have result in serious injuries.
1.3.2. Work with protective clothing and always wear eye protection.
Wearing suitable for the task being performed personal protective equipment such as dust
mask, healthy tightly closed shoes with a stable tread protective helmet and silencers (earplugs)
reduces the risk of accident.
1.3.3. Avoid the danger of inclusion of brush cutter inadvertently. Before connecting to the
mains, make sure the switch is set to “off”. Carrying brush cutter with your finger on the switch or
energizing power of the brush cutter when it is on, there is a risk of accident.
1.3.4. Before switching brush cutter is uverete that you remove it all utilities and switches.
Help tool forgotten on a moving unit can cause injuries.
1.3.5. Do not overreach. Work in a stable body position and at any time maintain balance. So you
can control the brush cutter better and safer unexpected situations.
1.3.6. Dress properly. Do not operate with loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts of brush cutter. Loose clothes, jewelery or long hair can be caught
in the chuck.
1.3.7. If possible, use an external aspiration system, make sure it is on and functioning properly.
Using aspiration system reduces risks due to give off dust when working.
1.4. Care of the brush cutter.
1.4.1. Do not overload the brush cutter. Use the brush cutter only in accordance with its intended