Raider RD-HPB01, User Manual

Page: 10 / 26

10 www.raider.bg
1. IMPORTANT SAFETY INSTRUCTIONS:
WARNING:
•
Read and understand the instruction manual thoroughly before using this tool. The
operator should follow all the instructions to reduce the risk of personal injury and/or
damage to the tool. Before allowing someone else to use this tool, make sure that they are
aware of all safety information.
•
The warnings, cautions and instructions stated in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator
that common. Sense and caution are factors which cannot be built into this product, but
must be supplied by the operator.
•
Save this manual, as it includes important safety warnings and precautions for the
procedures of assembly, operation, inspection as well as maintenance in the future.
•
Using the right tool for the right job ensures a better and safer performance. Do not
attempt to force a tool to do the job for which it is not designed.
•
Use the tool ONLY for its intended purpose. Do not use the tool for any purpose other than
for which it is intended.
•
Do not attempt to modify or alter the tool. All parts and accessories are designed with
certain safety features which may be affected if modifi ed or altered.
•
Maintain the tool with care and follow all the instructions while lubricating and changing
accessories for the tool.
•
Always keep the tool clean, dry and free from oil and grease for a better and safer
performance.
•
Do not roughly operate the tool, otherweise it will cause damage to your workpiece or even
personal injury.
•
Apply a thin layer of lubricant to steel parts of the tool to prevent it from rusting when it will
not be used for a long period of time.
•
Keep the label and nameplate of the tool. They carry important information.
2. WORK AREA
•
Only use the tool on a stable, level, dry, non-slip surface which is capable of supporting the
load being attached.
•
Keep your work area clean, dry and well lit.
•
Do not expose the tool to rain or any other kind of bad weather.
•
Do not use the tool in the vicinity of fl ammable gases or liquids. Hydraulic tools can create
sparks which may ignite the dust or fumes.
•
Anyone who does not wear appropriate safety equipment should stay away from the work
area.
•
Store the tool properly in a safe and dry location to prevent rust or damage.
•
Keep the tool out of the reach of children.
•
Avoid distractions around the work area as you otherwise may lose control of the tool.
3. PERSONAL SAFETY
CAUTION! ALWAYS WEAR PROTECTIVE EQUIPMENT APPROVED BY DIN (GERMAN
INSTITUTE FOR STANDARDIZATION) WHEN OPERATING THE TOOL
Always wear proper non-conductive clothing and DIN approved protective equipment
during operation.
• Safety helmet
• Ear protection
• Safety goggles with frontal and side protection
• Face shield
• Dust mask or respirator
• Thick work gloves
• Work shoes with non-slip soles or steel-toed boots