14
www.raider.bg
3. Assemble the elements of the battery grass trimmer and commissioning.
Some parts of the trimmer is dismantled in order to reduce the volume of the container during
transport.
Inserting / removing the battery
Remove the battery before any manipulation or cleaning the machine.
• Always release button on / off before inserting or removing the battery.
• To remove the battery, press the button at the end of the battery, then remove it from the tool.
• To insert the battery, slide the two grooves on both sides of the battery into the groove of
the housing and slide it into place. Always slide until it clicks into place. If you do not, it may
accidentally fall out of the tool and cause harm to you or someone around you.
Do not use force when inserting the battery. If the battery does not slide easily, it means that it is
not installed correctly.
4. Maintenance and Storage
4.1. After use, remove the battery from the trimmer and check for damage;
4.2. When not in use store the machine within reach of children;
4.3. Use only the manufacturer’s recommended spare parts and accessories RAIDER;
Once the machine is switched off, the blade continues to rotate for some time by inertia! Before
working on the trimmer, wait for the rotation of the motor and blade to stop completely!
Never attempt to stop the rotation of the knife!
When you need to perform activities near the knife, work always with protective gloves!
Perform maintenance procedures regularly to ensure your long-term and reliable use of the
trimmer. Check periodically for visible defects such as loose or damaged blade and loosened
screw connections. Make sure that the covers and safety equipment are in working and installed
correctly.
Cleaning tool, remove the battery and use mild soap and a damp cloth to clean the instrument. Do
not immerse the instrument in water and wash it with a hose. Do not allow any liquid to enter inside
it. Do not clean with high pressure cleaner ..
5. Run the mower
If the mower is used for the first time, check that the blade touches or passes a protective cover.
Push the button against accidental operation. Hold and press the switch.
Long grass must be mown in layers as shown in FIG. D
