18
www.raider.bg
- The guide bar and the cutting chain are mounted correctly.
- The cutting chain is properly tensioned.
–Only original accessories are correctly installed on this wood cutting machine.
The user can be cut by the moving cutting chain. The user may be seriously injured.
Do not touch the moving cutting chain.
If the cutting chain is blocked by an object: switch off the wood cutting machine and remove the battery. Only then
remove the object.
The moving cutting chain is heated and stretched. If the cutting chain is not sufficiently lubricated and tensioned, it may
pop out of the guide bar or break. This can result in severe personal injury and property damage.
Lubricate the cutting chain during operation after each battery charge. Use multi-purpose oil or biodegradable multi-
purpose oil.
During operation, regularly check the tension of the cutting chain. If the tension of the cutting chain is insufficient:
tighten the cutting chain.
During operation, the guide bar, the cutting chain and the sprocket may become hot. The user may get burned.
Do not touch the hot guide bar, cutting chain and sprocket.
Wait until the guide bar, the cutting chain and the sprocket have cooled down.
Wear work gloves made of durable material.
If during operation you notice changes or something unusual in the behavior of the wood cutting machine, it means
that the condition of the wood cutting machine may not meet the requirements for technical safety. This can lead to
serious injuries and property damage. In this case, the work must be stopped, the battery removed and a specialist
RAIDER store must be sought.
During operation, the wood cutting machine may cause vibrations. Wear gloves. Take breaks in the process of work. If
there are signs of impaired bleeding: see a doctor. When working with the underside of the guide rail, the wood cutting
machine is pulled out by the user.
If the moving cutting chain hits a hard object and stops quickly, the wood cutting machine may suddenly be pulled
out by the user. People can be injured.
Warnings:
-Hold the wood cutting machine firmly with one hand.
-Operating as described in this user manual.
-Work with a protective cover installed.
-Work with a working and unchanged protective cover.
-Only work with a well-sharpened and properly tensioned cutting chain.
-Place the support correctly.
-Work at full speed.
Installation of the guide rail (7) and the chain (8) on the machine.
To adjust the tension of the chain is a screw with a nut with a pin, which enters the designated hole of the guide rail. It
is especially important when installing the rail that the pin of the nut enters the hole in the rail.
By turning the screw (when the rail fixing nut is loose), the pin moves forward or backward and the chain loosens or
stretches accordingly.
Unscrew the rail retaining nut counterclockwise and remove the side cover. Align the hole, then place the bar and the
chain / Place the chain on the guide sprocket and the rail, making sure that the guide links of the chain enter the rail
channel. Move the guide rail away from the guide gear so that the chain guide elements are in the guide rail groove.
Check that the pin of the chain adjusting screw nut is in the lower hole of the rail. Tighten the saw cutting chain /
position 6 of the illustrated elements / . The measurement is performed when the rail is in a horizontal position.
Install the side cover and tighten the nut. Insert the battery. / See the sample figures /
