Raider RD-ET02, User Manual

Page: 14 / 76

14 www.raider.bg
8. DISPOSAL AND RECYCLING
The unit is located in the packaging to avoid damage during transit. This pack is
the raw material can be used again and can be returned and can be returned into
the cycle of the secondary surovini.Uredat and accessories are made of different
materials such as metal and plastics. If after prolonged use your machine needs
replacing , do not throw away the old case of household waste , and destroy it in a
way that is safe for the environment.
Waste electrical products should not be disposed of with household waste.
Please find out where there are opportunities to recycle. Ask local authorities or dealer advice on
recycling.
9. TROUBLESHOOTING GUIDE
Fault Possible causes Remedy
Motor does not start a) No power at the plug
b) Cable defective
c) Switch/plug block defective
d) Motor terminals or capacitor
disconnected
e) excessive working depth
a) Check the power cable and
fuse
b) Check
c) By customer service
workshop
d) By customer service
workshop
e) Reduce working depth
Motor performance drops a) Soil too hard
b) Blades badly worn
a) Correct working depth
b) Replace hoe blades
Important note!
For protection, the motor is equipped with a thermal switch which cuts out when the motor is
overloaded and switches on again automatically after a short cooling period.