15
10.Keep sharp tools clean and clean. Carefully maintained cutting tools with sharp cutting edges jam less
frequently and are easier to guide.
11. Use the power tool, accessories, replaceable tools, etc. in accordance with these instructions. Take
into account the working conditions and the activity performed. The use of power tools for applications
other than those intended may result in hazardous situations.
Using the cordless tool
1. Charge the rechargeable batteries only with the chargers recommended by the manufacturer. When a
charger is intended for a particular type of rechargeable battery, there is a risk of fire when used with other
rechargeable batteries.
2. Use only the rechargeable batteries provided for power tools. Use of other rechargeable batteries may
result in injury and fire hazard.
3. When you are not using the rechargeable battery, keep it away from paper clips, coins, keys, nails,
screws, or other small metal objects that may cause the contacts to bypass. A short circuit between the
battery terminals may cause burns or fire.
4. If used incorrectly, the battery may leak. Avoid contact with it. In case of accidental contact, wash with
water. In case of liquid in the eyes, seek additional medical attention. Leaking electrolyte from the battery
can cause skin irritation or burns.
Maintenance and cleaning
1. Repairs must be carried out by an authorized workshop using only identical spare parts. This will ensure
that the safety of the tool is maintained.
2. Remove the battery from the tool and unplug the charger before cleaning.
Cleaning
1. Keep protective devices, vents and housing clean (free of dust). Clean the tool with a clean cloth or
clean with compressed air at low pressure.
2. We recommend that you clean the tool directly after each use.
3. Clean the tool regularly with a damp cloth and a little soap. Do not use any cleaning agents or
detergents that may damage the plastic parts of the tool. Make sure that no water enters the tool.
Support
1. Fully discharge the battery at least once a year to maintain battery life.
PURPOSE
The tool is designed for quick tightening and loosening of nuts, bolts and other fasteners. Do not use
instead of a torque wrench or wrench. Be sure to use a calibrated torque wrench to tighten the fasteners
properly.
BEFORE USE
Before turning on the tool, read the following notes:
1. Charge the battery with the charger recommended by the manufacturer.
2. Use only appropriate inserts and bits.
BEFORE WORK
1. Inserting the battery (not included): Use only genuine lithium-ion batteries with the voltage indicated
on the rating plate of the power tool only. Use of other batteries may result in injury and fire hazard. Turn
the direction switch to the middle position to prevent the power tool from starting accidentally. Insert the
charged battery into the handle until it engages evenly.
2. Changing the direction of rotation: The direction switch (2) is used to select the direction of rotation -
clockwise or counterclockwise.
Clockwise - right rotation: To tighten and tighten screws and nuts, turn the direction switch to the left.
Counterclockwise counter - left turn: To loosen and loosen the screws and nuts, turn the direction switch to
the right.
(NOTE: Some screws, nuts, and bolts are inverted. Use the above instructions back.)
3. Switching on and off: To start the tool, press and hold the start switch (6). To turn off the tool, release the
trigger switch.
The speed of the tool is increased by increasing the pressure on the trigger switch. Release the trigger to
stop
To prevent accidental pressing of the start switch, an anti-switch button is provided.
