Raider Pro RDP-JS26, User Manual

Page: 9 / 76

9
Original instructions for use
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric, gasoline and
pneumatic machines - RAIDER. When properly installed and operating, RAIDER are safe and reliable
machines and work with them will deliver a real pleasure. For your convenience has been built and excellent
service network of 45 service stations across the country.
Before using this machine, please carefully acquainted with these “instructions’ manual”.
In the interest of your safety and to ensure proper use and read these instructions carefully, including
the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important that
these instructions will remain available for future reference to all who will use the machine. If you sell it to a
new owner “Instructions’ manual” must be submitted along with it to enable new users to become familiar
with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the
trademark RAIDER.
Address: Sofia City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel 02 +359 700 44 155, www.raider.bg;
www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope
of certification: Trade, import, export and servicing of hobby and professional electrical, mechanical and
pneumatic tools and general hardware. The certificate was issued by Moody International Certification Ltd,
England.
Technical Data
parameter unit value
Model
-
RDP-JS26
Mains voltage V AC 230
Frequency Hz 50
Power W 750
No-load Speed min-
1
0-3000
Max Depth Cutting in Metal
mm
10
Max Depth Cutting in Wood mm 100
Miter cut
O
from 0 to 45
Protection class - II
Layout.
1. Button to lock the switch.
2. ON/OFF Switch.
3. Adapter for dust extraction system.
4. Selector switch for pendulum action.
5. Base plate.
6. Guide roller.
7. Safety guard.
8. Blade holder.
9. Holder of the guide roller.
10. Screws to change the cutting angle.
11. Speed control.
EN