Raider Power Tools RD-F2, User Manual

Page: 10 / 32

10 www.raider.bg
WORKING WITH THE DEVICE
1. Place the fan on a flat and dry surface.
2. Plug the fan into a suitable outlet. Select the desired speed setting by turning the
speed control knob. There are 4 settings – 0 (off), 1 (low), 2 (medium) and 3 (high).
3. To adjust the tilt angle of the fan head by slightly pressing the guard.
Caution: The fan must always be off when making this adjustment.
4. Turn the speed control knob to “0” and unplug the fan after use.
Warning: Never touch the blade with your hand or other objects when the fan is running.
CARE AND CLEANING
• Always unplug the fan before cleaning.
• Avoid contact with moving parts of the fan.
• Use only a soft damp cloth to clean the fan.
• DO NOT immerse the fan in water and never allow water to drip into the motor housing.
• Never spray the device with liquids or immerse it in water or any other liquid.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• Make sure the fan is disconnected from the mains before removing the grille.
• Clean the fan blade and grills with a soft damp cloth.
CAUTION: The fan blade may have sharp edges. Work with extreme care.
• Store the fan in its original box or cover it to protect it from dust in a dry place if it will not
be used for a long period of time.
Environmental protection.
In order to protect the environment, the power tool, accessories and packaging must
undergo appropriate processing for the reuse of the raw materials contained in them.
Do not dispose of power tools with household waste! According to the EU Directive
2012/19/EC on waste electrical and electronic equipment and the approval and as a
national law, power tools that can no longer be used must be collected separately and
undergo appropriate processing to recover their contents scrap.