Raider 123201, User Manual

Page: 20 / 62

20 www.raider.bg
6.1. Clean the water filter once a month or more frequently depending on use. See also
paragraph 3.10.
6.2. When obstruction of the nozzle is obtained very high pressure. Therefore, it is
immediately necessary cleaning. IMPORTANT: Instrument cleaning nozzle (5) should be
used only when high pressure cleaner is off!
6.3. Vent should always be clean and free.
6.4. If necessary, repair your high pressure cleaner power and is best carried out only
by qualified specialists in workshops RAIDER, which used only original spare parts. Thus
ensuring their safe operation.
7. Removal of possible malfunctions.
The table below shows signs of defects and how you can help if your power fails to operate
normally. If you can not find and fix the problem by following the instructions in the table,
contact the authorized service of Rider. Warning: Before you begin troubleshooting, high
pressure cleaner and stop it from the supply network.
Problems Cause What to do
Machine is not
starting
the plug is not inserted in
the socket.
Insert the plug in the socket
the socket is broken. Use another socket
The safety switch has been
activated
After checking the reason for activation of
the safety swith, replace it (ot switch it on)
The extension cable is
damaged
Replace it.
The engine stops The automated protection
has bee activated
Wait a few minutes untill engine cools
Working pressure is
too high
The nozzle is partly stuck Check and clean it - See p. 6.2.
Pulsing pressure
There is air in the ump or
the hose..
Remove the extra air - see p. 4.7 и 4.8.
Watter feeding is not good. Ensure that the parametserof the water
network are appropriate to what is shown in
p. 3.10.
Water filter (6а) need
cleaning.
Check and clean the water filter. See p.
3.10. and figure (А) and (F).
The water hose is twisted
or folded.
Check and fix it
The engine is
working but there is
no pressure
There is no water feeding. Turn the water supply on.
The filter (6а) need
cleaning.
Check and clean the water filter. See p.
3.10. and figure (А) and (F).
If necessary, repair your machine is best carried out only by qualified specialists in
workshops RAIDER, which used only original spare parts. Thus ensuring their safe operation.
11. Environmental protection.