RAID N8103-134, Setup Manual

Page: 17 / 80

856-127900-408- B
16
<Cleaning and Working with the Product>
Do not disassemble, repair, or alter the server.
Never attempt to disassemble, repair, or alter the product on any occasion. Failure to
follow this instruction may cause an electric shock or fire as well as malfunctions of
the product.
Disconnect the power plug before accessing inside the server.
Make sure to power off the server and disconnect the power plug from a AC outlet
before accessing inside the server. Touching any internal device of the server with its
power cord connected to a power source may cause an electric shock even if the
server is off-powered.
Make sure to complete installation.
Always connect the DC cable and/or interface cable firmly. An incompletely
connected cable may cause a contact failure, resulting in smoking or fire.
<During Operation>
Avoid contact with the server during thunderstorms.
Disconnect the power plug from the outlet when a thunderstorm is approaching.
If it starts thundering before you disconnect the power plug, do not touch any part of
the server containing the product. Failure to follow this warning may cause an electric
shock.
Keep animals away from the server.
Keep animals away from the server containing the product.
Pet's discharges or fur may enter the server and cause a fire or electric shock.