Chapter 5 Subsystem Maintenance and Upgrading
5.4.2 Replacing a PSU Module
To replace a PSU, please follow these steps:
Step 1.
Flip open the cable clamp (if used) and remove the power cord
connecting the failed module to the main power. If the provided
cable clamps are used, remove them.
Figure
5
-6: Removing the Power Cord
Step 2.
Remove the retention screw
located on the right side of the PSU.
(See
Figure
5-7
)
Figure
5
-7: Removing the PSU Retention Screw
Replacing a Failed PSU Module
5
-
9