4
Charging the LiPo Battery
It is important to fully charge the LiPo flight battery before
your first flight.
The USB charger can be powered by the USB port on your
computer or a wall plug USB port. Plug the charger into a
suitable USB port and then plug the flight battery into the
charger. A red light will illuminate and blink during charging.
When the charge is complete the red light will go out.
CAUTION: ONLY CHARGE THE FLIGHT BATTERY WITH THE INCLUDED USB LIPO CHARGER OR A
SUITABLE LITHIUM BATTERY CHARGER. NEVER ATTEMPT TO CHARGE A LIPO BATTERY WITH A
CHARGER THAT IS NOT SPECIFICALLY MADE FOR USE WITH LITHIUM BATTERIES.
Super Cub MX RTF Contents
Binding is the process of programming the receiver to recognize the GUID (Globally Unique
Identifier) code of a single specific transmitter. When a receiver is bound to a transmitter, the
receiver will only respond to that specific transmitter.
If you need to rebind for any reason, please follow these steps:
• Make sure the transmitter is turned off, the throttle is off (stick to bottom) and the
PASS switch is in the Partial or Full Assist position.Plug the flight battery in while
keeping the airframe still for gyro calibration.
• Turn on the transmitter within 5 seconds.
• The receiver LED will flash for 3-5 seconds and then bind automatically.
• Once bound, the LED will remain solidly lit.
Binding
Summary of Contents for Super Cub MX
Page 12: ...2018 HRP Distributing Inc ...
