Rafiki Protection Twinflex, User Manual

Page: 8 / 24

Twinflex and Multipoint User Guide
8
On Hearing the Alarm
The responsible person should have already prepared written procedures for the action to be taken in
the event of a fire alarm. When the alarm sounds these procedures should be implemented.
Silencing the Alarms
When the fire procedures have been carried out and it is safe to silence the alarm, proceed as follows:
Set the panel to access level 2 (see above).
Press button 1.
The ALARMS SILENCED LED is lit and the buzzer continues to pulse. The alarm sounders are
muted.
Note . If another device is activated on a different zone, e . g. by the fire spreading, the alarms will
resound and the new alarm is displayed.
Resetting the System
Before attempting to reset the system the cause of the alarm should be established. An activated
detector is indicated by its LED being lit, and a call point can be identified by the broken glass.
The system will not reset if the cause of the alarm is still present, e.g. smoke or heat in the vicinity of a
detector or broken glass in a call point.
Set the panel to access level 2.
Press button 2.
Note. The alarms must be silenced before the panel can be reset.
Sound Alarms (Evacuate)
To activate the sounders at any time, or after they have been silenced, proceed as follows:
Set the panel to access level 2.
Press button 3.
The panel displays a fire condition and activates the sounders.
To silence the sounders, silence alarms and reset the system as described previously.
http://www.firealarmengineers.com