14
GammaRAE II
Datalog Set
Select Datalog Set to change any of the following
datalog parameters:
Clear Data
Datalog Period
Datalog Type Quit
Clear Data:
Press the SET button to clear the
datalog. Press the MODE button to return to the
Datalog Set Menu.
Datalog Period:
Set the time interval between
datalog points. You may set any time interval
between 1 and 3600 seconds. Press the MODE button
to step through the digits from left to right. Use the
SET button to increment each digit (from 0 to 9).
Select Save to save changes or Quit to discard
changes.
Datalog Type:
Set the type of datalogging. Choices
are Continuous or Event-driven. Choose Continuous
to log data at a set interval at all times (except when
the unit is Programming Mode). Choose Event-
