11
The Buzzer in Alarm is tested.
Press the SET button to finish the TEST functions.
This returns GammaRAE II to Normal Operating
Mode. During any test, if the SET button is not
pressed within 60 seconds, the unit will automatically
move on to the next test.
Programming Mode
Programming Mode is used to change alarm settings and
detector settings (units of measure, time, etc.).
Note:
Changes to some parameters cause the detector to
automatically restart or recalibrate.
From Normal Operating Mode, simultaneously press the
MODE button and SET button, and hold them down for 3
seconds. GammaRAE II enters the Programming Mode and
displays the Main Menu:
