
FA-200 Alarm Bar User’s Guide
5
3 Physical Description
The FA-200 Alarm Bar comes pre-assembled and requires
only connection via its integrated cord to a controller with
relays. It has mounting flanges at the top and bottom with
four holes that accept screws for attaching the FA-200
Alarm Bar to a wall or other flat surface. It receives all
power from the controller that it is attached to, simplifying
installation and maintenance.
4 Installation
4.1 Mounting the FA-200 Alarm Bar
The FA-200 Alarm Bar is designed to be wall-mounted and has
four holes for anchoring the FA-200 Alarm Bar, using screws or
bolts.
Before mounting the FA-200 Alarm Bar, make sure that its cord
can reach the controller that it will be electrically connected to.
Make sure that there is approximately 12" (30 cm) of clearance
on all sides of the FA-200 Alarm Bar so that the siren’s sound is
not attenuated and to ensure clear view of the four visible alarm
lights.
Follow these steps:
1.
Locate the FA-200 Alarm Bar on a wall or other flat surface
and mark the four holes’ locations.
2.
Remove the FA-200 Alarm Bar.
3.
Drill the four holes.