RAE-SAN DRAFT D, Installation Manual

Page: 13 / 20

Page:13
FALSE => Starter always available ignore
gate and kill inputs for starter
STARTER Gated TRUE=> Gate must be active to start
FALSE=> Ignore Gate Input TRUE FALSE TRUE
STARTER Inhibited by Kill TRUE => Starter wont activate if Kill Active
FALSE => Starter ignores Kill Switch setting FALSE FALSE FALSE
INDICATOR MAX FLASH Limit TRUE => Count Flashes for time then stop
FALSE => Flash forever until button
deactivated TRUE TRUE TRUE
IND MAX FLASH Time Value Time Limit in Seconds for Flashing (10 – 90) 20 20 20
INDICATOR FLASH RATE Hz
(1-5) Number Of Flashes per Second – nominal
3Hz 3 3 3
BRAKE Warning FLASH TRUE=> Fast Flash Brake Light when first
activated to grab attention
FALSE=>Standard Brake Light TRUE TRUE TRUE
BRAKE WARN FLASH Number If Warning Flash ON – Number of Flashes (0
– 10) 5 5 5
BRAKE Off when IND On TRUE=> Brake Light turned off when
indicator flashes – used to make integrated
indicator / brakes lights more visible
FALSE=> Brake Light on, Indicator Flash
Normal – doesn’t affect brake light. FALSE FALSE FALSE
Enable HEATED GRIP Function TRUE=> Enables the PWM headed grip
function-
FALSE=> No Heated Grip Function Active FALSE TRUE FALSE
Heated Grip Heat Steps (2-5) Number of graduations in the heated grips
settings. These are equally heat spaced (2-5) 4 5 4