Radyne DM240XR, Installation And Operation Manual

Page: 96 / 130

DM240XR High-Speed Digital Modulator Appendix A
TM120 – Rev. 1.1
A
-17
<1> Common Fault
Mask
Bit 0 = -12 V Alarm
Bit 1 = +12 V Alarm
Bit 2 = +5 V Alarm
Bit 3 = Spare
Bit 4 = Spare
Bit 5 = Spare
Bit 6 = Spare
Bit 7 = Spare
0 = Mask, 1 = Allow
<1> Reserved TBD, Default = 0
<4> Symbol Rate Symbol Rate in Symbols Per Second
(See note at the end of this command.)
<1> Terrestrial
Framing
0 = 188 Byte, 1 = 204 Byte, 2 = No Framing
(See note at the end of this command.)
<1> Roll Off 0 = 0.35, 25 = 0.25, 1 = 0.20
<1> Reserved TBD
<1> Output Clock
Source
0 = SCTE, 1 = SCT, 2 = None
(See table at the end of this command.)
<1> Network Spec 0 = DVB-S
9 = DirecTV
11 = DVB-S2-CCM
13 = DirecTV AMC-NBC
15 = DVB-S2-ACM
<1> BB Scrambler
Bypass
0 = Normal, 1 = Bypass
<1> Outer FEC
Bypass
0 = Normal, 1 = Bypass
<1> Test Pattern 0 = None, 1 = 2
15
– 1, 23 = 2
23
-1
<1> Last Rate
Control
0 = Symbol Rate, 1 = Data Rate, 2 = Auto
<1> Interleaver
Bypass
0 = Bypass, 1 = Normal
<1> PCR
Restamping
0 = Off, 1= On
<1> Multi-PIIC Mode Without Multi-PIIC Card:
1 = Manual
With Multi-PIIC Card:
1 = Manual,
2 = Redundancy