Radwin 2000+ SERIES, User Manual

Page: 199 / 276

RADWIN 2000+ Series User Manual Release 4.2.40 14 ‐ 3
Bulk Software Backup
10.104.3.4,netman,admin,netwireless
A PtMP list will contain the HBS and registered HSUs.
The center button allows you to add a single site:
Figure 14 ‐ 3: Adding a single site for backup
Enter the IP address of the site, the Read ‐ Write Community (Default: netman ) and
then click OK . The site will appear in the Software Upgrade list box.
Items from the list can be cleared by selecting them and then using the right but ‐
ton .
The right button in Figure 14 ‐ 3 , may be ruse to remove one or more selected sites.
3. You may choose the SNMP version but probably it should be best left at your log ‐ on
setting.
4. Click the Start Backup button. Progress bars indicate backup status.
The success or failure of the backup is displayed on completion:
Save configuration produces a text file in the format of the above example for backing up an
installed link.