Radware DefensePro VA, Installation And Maintenance Manual

Page: 67 / 83

DefensePro VA Installation and Maintenance Guide
DefensePro VA Installation and Configuration
Document ID: RDWR-DPVA_IG2005
67
• You can obtain a DefensePro VA license based on the MAC address or the IP address of the
management interface. If you are planning to migrate the VM, Radware recommends obtaining a
license based on the IP address. If the management IP address might change, it may be better
to obtain a license based on the MAC address.
• The MAC address and the management IP address can be obtained from the DefensePro VA
console.
• To obtain the MAC address, type the command:
system device-info
• To obtain the management IP address, type the command:
net ip
To obtain and install a new license
1. In the Radware portal, in the Software License Generator screen
( https://portals.radware.com/Customer/Home/Tools/LicenseGeneratorSW/ ) enter the MAC or IP
address, your name and product, select the required version and click Generate License .
Alternately, you can get the license string from Radware Technical Support.
2. Using the license string, and depending on the license type, enter the command:
system license throughput set <throughput license string>.
system license vcpu set <vcpu license string>.
For example:
system license throughput set 10Gbps-XvlkjKwg
3. A confirmation message displays when the license installation is complete.
Note: You can also set the license keys through APSolute Vision. For more information, refer to the
DefensePro User Guide .
Checking License Status
You can view the license information using the commands:
system license throughput
system license vcpu