22.3. Checkweighing
In case of enabling the checkweighing mode, printouts are performed only
when a weighing is between
MIN
and
MAX
thresholds that have been
defined before.
Procedure:
•
Enter parameters group
<
Working Modes>
according to ch. 22
of this manual,
•
Enter the required working mode and choose
<
Checkweighing>
then set the required option.
Options:
No
- Every weighing is recorded
Yes
- Only weighings between MIN, MAX are recorded.
22.4. Tare mode
This function enables users to set parameters for tarring.
Procedure:
•
Enter parameters group
<
Working Modes>
according to ch. 22
of this manual,
•
Enter the required working mode and choose
<
Tare mode>
and then set the required option.
Options:
Single
- Basic tare mode. The set (chooden) tare value
is overwritten after entering a new value.
Current sum
- Summing up tare values of product and package
together with manually inscribed tare. After next
setting of product or package tare the entered
tare value is disabled.
62