19
10.4. Taring
To determine net weight value, load the weighing pan with a packaging, wait
for a stable indication and press
key. Zero indication and the following
pictograms are displayed:
Net
and
. The scale has been tared.
Remember not to exceed the maximum capacity, i.e. sum of tare weight value
and load weight value must be lower than the maximum capacity value.
Upon unloading of the weighing pan, the sum of tared masses with minus sign
is displayed.
It is impossible to tare zero or negative values. When you tare
zero or negative values the scale responds with the following
message: <Err3>.
10.5. Dual Range Devices
N/A in case of single range scales
Switching from weighing with the accuracy of the
1 weighing range
to
weighing with the accuracy of the
2 weighing range
takes place automatically
upon exceeding Max of the
1 weighing range
.
In case of dual range scales:
upon switching to weighing with the accuracy of the 1 weighing range,
pictogram/marker is displayed on the left,
upon switching to weighing with the accuracy of the 2 weighing range,
pictogram/marker is displayed on the left.
Switching from weighing with the accuracy of the
II weighing range
to weighing with the accuracy of the
I weighing range
takes place
automatically upon unloading of the weighing pan and returning to AUTOZERO
– (
pictogram/marker is displayed).
11. TECHNICAL SPECIFICATIONS
For technical specifications of respective scales go to RADWAG website
