RADWAG PUE HX5.EX, Software Manual

Page: 37 / 96

37
11.3. Adjustment Report
Group of parameters allowing you to declare variables that are to be printed
on an adjustment report printout. Adjustment report is automatically generated
at the end of each adjustment process.
Variables description
Project
Project name (31 characters maximum).
Adjustment type
Performed adjustment type.
Operator
Logged-in operator name.
Project
Project name printout.
Date
Adjustment performance date.
Time
Adjustment performance time.
Scale S/N
Serial number of the scale.
Adjustment result
difference
Difference between mass of the adjustment weight that was measured
during the last adjustment and mass of a currently measured
adjustment weight.
Dashes
Dashed line separating printout data and signature fields.
Signature
An area for the signature of an operator carrying out the adjustment.
11.4. Dosing Report
Group of parameters allowing you to declare variables that are to be printed
on a dosing report printout. Dosing report is generated automatically after
either completion or abortion of each process.
Variables description
Variable Description
Start date
Dosing process start date.
End date
Dosing process end date.
Operator
Operator carrying out the dosing process.
Customer
Customer for whom the dosing process is carried out.
Product
Name of dispensed product selected from
<Products>
database.
Fast dosing threshold [DT1]
Mass value for rough dosing in case of automatic 2-stage
dispensing.
Dosing threshold [DT2]
Enter to set target mass value to be dosed in case of an
automatic dispensing.