RADWAG MAS 1. Y, User Manual

Page: 63 / 201

- 63 -
Procedure 2 – entering checkweighing thresholds manually:
•
Press < button (Target value).
•
Window for entering target value and tolerance is displayed, enter the values.
•
Return to weighing.
Caution: For a product acquired from Products Database the Target Value and Tolerance
data are already given. The data can be edited and modified.
18.2. Mode Related Settings
To find out more about the remaining functions refer to section 15.7 of this user manual,
Additional Parameters for a Weighing Process .
19. PERCENT WEIGHING AGAINST REFERENCE SAMPLE MASS
< Percent weighing > is a working mode for comparison of the measured sample's
weight with the reference mass. The result is expressed in [%].
PERCENT WEIGHING function can be aided by DOSING and CHECKWEIGHING functions.
Mind that these are not started automatically, neither is bar graph.
Percent Weighing mode screen:
1. Setup – press to access balance menu.
2. Print header – press to print data declared
in the header.
3. Print footer – press to print data declared in
the footer.
4. Products Database – press to select
products from products database.
5. Percent weighing: press to set reference
mass.
6. Percent weighing: press to set as 100%.
19.1. Sample Mass and Reference Sample Mass Comparison
−
Comparison methods: Entering reference mass, to do it press button (Set
reference mass).