•
Confirm the changes introduced by pressing
.
22.6. Statistics
All statistics are continuously updated after each measurement is saved
in the scale memory. Statistics can be calculated globally (does not depend
on the selected product) or separately for every product from the assortment
database. It can be set in parameters <
Statistics>.
Procedure:
•
Enter
<
Working modes> parameter group as described
in chapter 22 of the manual,
•
Enter the required working mode and choose <
Statistics>
and then set the required option.
Options:
Global
-
global statistics,
Product -
statistics for every product.
Notice:
In case of operation with <
Statistics> set to <Product> bare in mind
that after restarting only statisics of the last weighed product are recovered.
22.7. Automatic correction of reference mass
It concerns the <
Counting pieces> working mode
Working mode <
Counting Pieces> comprises a special function
<
Automatic correction of reference mass>, that can be used for
correcting the unit mass <SMP>.
To enable the function in parameters you need to:
•
Enter parameter group <
Working modes> according to ch.
22 of this manual, choose: „
Counting Pieces /
Automatic
correction of reference mass” and set appropriate option.
71
