16
Place the scale on a flat and even surface, install ramps onto the steel
brackets.
Remove ramps, looking through bracket holes, mark spots where
openings for anchor bolts are to be made.
Drill openings, mount steel brackets to the ground.
7.1.4. Track Scales: HY10.2K Series
Track scale is comprised of load-bearing structure and load cells (measuring
components). The scale is installed on a rail of the load-bearing structure of the
suspended track, the load cell is installed in a particular section of the track.
The scale must be installed by an authorized RADWAG
service exclusively, otherwise the warranty gets null and
void. During scale installation attention must be paid to
stresses and the weighing system, i.e. the weighing system
must lack the stresses.
5 - nut
6 - washer
7 - centring cone
8 - anchor bolt
