RADWAG DJ-04, User Manual

Page: 6 / 12

6
Due to high voltage, typical for the ionizer, remain extremely careful
while operating it.
You are not allowed to either disassemble or modify the ionizer. Use
the device only as intended.
The ionizer must be connected to the mains only by means of an
original power cord which comes standard with it. Rated voltage
(specified on the device’s data plate) must be compatible with the
mains rated voltage.
The power cord can be connected only to a socket with a ground
contact.
The ionizer when not operated must be disconnected from the
mains.
Any repairs to be done must be carried out by service authorized by RADWAG.
CAUTION
It is forbidden to connect ionizer that is broken to the mains – this
may result with either electrocution or fire.
It is not allowed to use ionizer outdoors or in vehicles, this will result
with loss of warranty.
Be aware of the fact that the device in the course of regular operation
may get warm.