6
If you clean the weighing pan while it is installed, you can
damage the scale.
3.1. Cleaning ABS Elements
Dry surfaces are cleaned with clean cellulose or cotton cloths that do not leave
streaks or colors. It is also allowed to use water solution and cleaning agent
(soap, dishwashing liquid, window cleaner). While cleaning surfaces, it is
necessary to regularly press the cloth against the surface. The surface must be
wiped and then dried. Cleaning can be repeated if necessary.
In case of stubborn dirt, such as glue, gum, tar, polyurethane foam, etc., you
can use special cleaning agents based on aliphatic hydrocarbons. Before using
the cleaning agent, it is advisable to conduct usability tests for all surfaces.
Do not use abrasive agents.
3.2. Cleaning Stainless Steel Elements
While cleaning stainless steel, it is essential that you avoid cleaning agents
based on caustic chemicals, e.g. bleaches (chlorine-rich products). It is
forbidden to use abrasive preparations. Always remove dirt with a microfiber
cloth so that protective coatings of the elements cannot be damaged.
In case of daily care and stain removal, follow the steps below:
1. Remove dirt with a cloth immersed in warm water.
2. For the best results, you can add a drop of dishwashing liquid.
3.3. Cleaning Powder-coated Elements
The first step is to pre-clean elements under running water or with a large-pore
sponge and large amount of water in order to eliminate loose or stubborn dirt.
It is forbidden to use abrasive agents. Next, using a suitable cloth and water
solution and cleaning agent (soap, dishwashing liquid), apply a regular
pressure of the cloth against the surface while cleaning. Never dry-clean with
a very detergent as it may damage the coating. It is advisable to use a large
amount of water or water solution with a cleaning agent.
3.4. Cleaning Aluminum Elements
For cleaning aluminum, use products based on natural acids. The following
products will be perfect: synthetic vinegar, lemon. It is forbidden to use
abrasive agents. Do not use coarse brushes that can easily scratch aluminum.
A soft microfiber cloth will be the best choice.
