Resolving Camera Issues
Problem
Cannot see the camera’s output after setting up.
Solution
Press
on the XT Remote Control Unit repeatedly to switch between the different video
sources.
Solution
Ensure the camera is correctly connected to the system.
Problem
I can see the camera’s output, but I cannot move the camera.
Solution
Press
on the XT Remote Control Unit repeatedly to switch between the different video
sources.
Solution
Ensure the camera is correctly connected to the system.
Solution
Make sure the Moving setting is enabled:
1.
Access the SCOPIA XT Series web interface.
2.
In the Administrator settings tab, select I/O Connections > Cameras > General > HD1.
Figure 3-6
Enabling the Moving setting
3.
Make sure that the Moving field is set to Yes.
RADVISION | Administrator Guide for SCOPIA XT4000 Series Version 3.0
Troubleshooting | 31
