RADVision SCOPIA VC240, Manual

Page: 7 / 17

4
The “Source” button on the remote control selects either the PC (analogue PC input/
DVI input) or the VC (conferencing CODEC output) to be displayed on the picture
monitor. To preview the computer output during a videoconference or to use the
system as a PC monitor when not in a call, either PC or DVI are selected.
During a conference the “Layout” button on the remote control cycles between the
various screen layouts:
PC/DVI input
Full screen of the computer image
Full screen of the computer image with far image PIP
Side by side computer and far image
Large computer image with, small near and far images
VC mode
Full screen of the far image
Full screen of the far image with near image PIP
Side by side far and near image
Large far image with small near image
When H.329 dual images are either transmitted or received the remote control
layout button cycles between the available screen layouts in VC Mode:
Transmit H.239
Full screen of the presentation image
Full screen of the presentation image with far image PIP
Side by side presentation and far image
Large presentation image with small near and far images*
Receive H.239
Full screen of the presentation image
Full screen of the presentation image with far image PIP
Side by side presentation and far image
Large presentation image with small far image
*The ability to display all three images: Presentation, near and far is only available
at the H.239 transmit end. At the receive end only two images i.e. the presentation
and far images may be displayed simultaneously.