5
M16MI325 A03_06/18
In the device display, a selector indicates the boost duration level by po-
sitioning it in front of the colour: red, orange or green. So, depending on
the duration of the boost, you can choose your level of energy usage. As
the boost duration increases, the consumption will be higher.
The gauge appears in Boost, Auto, Comfort, Eco and Frost protection
modes and whatever the temperature level and depends of set duration
of boost.
BOOST DURATION GAUGE
C - Red colour
Long period of boost: it is
advisable to significantly
reduce the duration of
boost.
Boost duration
> 60 minutes
When the boost dura-
tion is longer than 60
minutes
B - Orange colour
Average period of boost:
it is advisable
to slightly reduce the
duration of boost.
30 minutes < Boost
duration ≤ 60 minutes
When the boost dura-
tion is longer than 30
minutes and shorter or
equal to 60 minutes
A - Green colour
Ideal duration.
Boost duration ≤ 30
minutes
When the boost dura-
tion is shorter or equal
to 30 minutes
You can access the Comfort temperature set up from the Auto and
Comfort Mode. It is preset to 19°C.
SETTING THE COMFORT AND ECO MODE
TEMPERATURES
It is possible to see the estimation of energy consumption in kWh since
the last reset of the energy meter.
CONSUMPTION INDICATION
ACCUMULATED IN KWH, ENERGY
SAVINGS
Display of the estimated power consumption
To reset the energy meter, from Auto, Comfort, Eco or Frost protection
mode, then proceed as follows.
Resetting the energy meter
1-
Press
.
2-
Press simultaneously
and
for more than 5 seconds.
To exit resetting the energy meter, press any button, the device is
automatically in the previous active mode.
To see this estimation, from Auto,
Comfort, Eco or Frost protection mode,
then press
.
To exit the display mode of
consumption: press any button, the
device is automatically in the previous active mode.
1 2 3 4 5 6 7
CHILD ANTI-TAMPER,
KEYPAD LOCK/UNLOCK
Keypad unlock
To unlock the keypad, press the
and
buttons hold them down
for 10 seconds again. The padlock symbol disappears from the dis-
play, keypad is unlocked.
Keypad lock
To lock the keypad, press the
and
buttons and hold them
down for 10 seconds. The padlock
symbol appears on the display,
the keypad is locked.
3
POST-VENTING
Using
and
you can adjust the temperature from 16°C to 19°C
by intervals of 0.5° C.
When the blower and the heating cartridge switch off, the venting
continues to operate during few seconds to preserve and optimize the
product life time.
Seconds appear and begin to count
down, the keypad is inactive du-
ring the post-venting.
Important: when the keypad is
locked, only the button (switch) is
active.
If the device is on Standby mode when the
keypad is locked, you have to unlock it for the
next heating on to access the setup.
Set the Comfort mode temperature
Set the Eco mode temperature
You can access the Eco temperature set up from Eco Mode. It is preset
to 15°C.
Using
and
you can adjust the temperature from 12°C to 15°C
by intervals of 0.5° C.
EN
