background image

4

5044-794

3. SURFACE CLEANER OPERATION

WARNING!

This surface cleaner is compatible with most pressure washers. A 

pressure washer, hose, gun, and lance (none included) are required to 

operate this surface cleaner. Do not operate with any pressure washer 

exceeding 3300PSI, higher pressures will damage this device and may 

cause injury.

Note

 

 

Your pressure washer lance must be equipped with a female ¼” quick 
connection fitting.

1.  Ensure your pressure washer is turned off. Assemble your pressure washer, 

hose, gun, and lance. 

2.  Depress the trigger on your pressure washer gun to release any pressurized 

water from the assembly.

3.  Place the surface cleaner on a level, hard surface.
4.  Connect the end of your pressure washing lance to the male quick connect 

coupler located at the top of the surface cleaner.

5.  Start the pressure washer. 
6.  Place surface cleaner on the surface you are cleaning, firmly grip the gun and 

lance, and depress the trigger to start cleaning.

Note

 

 

To stop, turn off your pressure washer and depress the trigger to release 
any pressurized water from the assembly before disconnecting the 
surface cleaner.

1/4” Female Quick Connect 
Coupler on Lance (not included)

1/4” Male Quick 
Connect Coupler

Summary of Contents for 5044-794













Reviews: