background image

1

1. SAFETY

DANGER!

Read instruction manual before operating this device; failure to do so 

may result in injury, damage to equipment or property.

This surface cleaner is designed to clean sidewalks, driveways, decks, 

and other large surfaces. Two jets beneath the plastic cover emit 

pressurized water while rotating rapidly. The water emitted by this 

surface cleaner can injure and cause damage. 

1.1 OPERATOR SAFETY

WARNING!

 

 

ALWAYS wear protective eyewear. 

 

 

ALWAYS keep clear of rotating nozzles and water jet output. 

 

 

NEVER direct water jets towards yourself, other people, animals, vehicles, 
windows, electrical equipment, or the pressure washer itself. 

 

 

ALWAYS keep this device on a flat surface with the nozzles downwards 
when starting your pressure washer. 

1.2 USE SAFETY 

WARNING!

 

 

DO NOT exceed 3300PSI during operation.

 

 

DO NOT depress the trigger and release water from the pressure washer 
until the surface cleaner rests on the surface you are cleaning.

 

 

DO NOT reach under this device while in operation. 

 

 

DO NOT operate when other people are in the immediate vicinity.

 

 

DO NOT lock spray gun trigger open while operating this device. 

 

 

DO NOT modify this device or operate when damaged. 

 

 

DO NOT allow this device to remain stationary on soft surfaces, such as 
wood, for prolonged periods while in operation, always test a small area 
to see if the surface can withstand the high pressure.

 

 

Be aware the surface cleaner may push back against the pressure washer 
gun and lance assembly during operation, always hold the gun and lance 
firmly with two hands. 

 

 

The rotating jets must not touch the work surface. Striking any raised 
obstacle during operation will damage the jets. If contact does occur 
and results in vibration, stop immediately. Continued operation could 
result in injury or damage.

Summary of Contents for 5044-794













Reviews: