10/13/14 10:47 AM
Maintenance tips for your HAMMER•HEAD unit.
Page 1 of 2
Thousands of HammerHead pool cleaning units are currently in
use across the United States and in other parts of the world.
With proper care they will provide years of dependable
service. Below are some maintenance and operating routines
that can help avoid costly repair bills and lost time on the job.
**Please note: IMPROPER BATTERY USE OR FAILURE TO INSPECT AND MAINTAIN
YOUR 12 VOLT BATTERY CAN RESULT IN SHORT CIRCUITS, DAMAGE DUE TO
OVERHEATING, BATTERY FAILURE, AND POSSIBLE FIRE OR PERSONAL INJURY. THE
OPERATOR ASSUMES ALL RESPONSIBILITY AN/OR RISK ASSOCIATED WITH BATTERY
INSTALLATION AND USE, AND PROPER OPERATION OF HAMMER•HEAD UNITS. USE
OF ANY POWER SOURCE OTHER THAN A SERIES 24, 27, or 30 12 VOLT DEEP CYCLE
MARINE BATTERY IS NOT RECOMMENDED AND VOIDS ALL WARRANTY OR LIABILITY
CLAIMS.
DAILY SAFE OPERATING
WEEKLY MAINTENANCE
IF THE PROP JAMS, QUICKLY SHUT
OFF THE UNIT TO AVOID MOTOR
DAMAGE
REMOVE THE PROP FROM THE SHAFT AND
REMOVE ANY TANGLED DEBRIS
How do you do this?
SEE BELOW:
1. HOLD PROP WITH ONE HAND
AND UNSCREW PROP NUT
COUNTERCLOCKWISE
2. REMOVE PROP AND PULL PROP
PIN OUT OF THE SHAFT.
DON'T LOSE THE PIN!!
CLEAN OR CUT DEBRIS OFF THE
SHAFT AS NEEDED.
