RADLEY 1346-801, Owner'S Manual

Page: 7 / 18

`
6
NEVER TOUCH BLADE or other moving parts during use.
NEVER START A TOOL WHEN ANY ROTATING COMPONENT IS IN CONTACT WITH THE WORKPIECE.
DO NOT OPERATE A TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR ANY
MEDICATION.
WHEN SERVICING use only identical replacement parts. Use of any other parts may create a hazard or cause
product damage.
USE ONLY RECOMMENDED ACCESSORIES listed in this manual or addendums. Use of accessories that are not
listed may cause the risk of personal injury. Instructions for safe use of accessories are included with the
accessory.
DOUBLE CHECK ALL SETUPS. Make sure wheel is tight and not contacting saw or workpiece before connecting to
power supply.
SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
WARNING: Know your wet tile saw. Do not use the wet tile saw until you have read and understand this
Instruction Manual. Learn the tool’s applications and limitations, as well as the specific potential hazards
related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
Always wear eye protection. Any power tool can throw foreign objects into your eyes and cause permanent
eye damage. ALWAYS wear safety goggles (not glasses) that comply with ANSI safety standard Z87.1.
Everyday glasses have only impact resistant lenses. They ARE NOT safety glasses.
WARNING: Glasses or googles not in compliance with ANSI Z87.1 could cause serious injury when they break.
SECURE WORK firmly against the miter guide or fence.
NEVER stand or have any part of your body in line with the path of the blade.
NEVER attempt to free a stalled blade without first turning the saw OFF and disconnecting the saw from the power
source.
IF THE POWER SUPPLY CORD IS DAMAGED, it must be replaced only by the manufacturer or by an authorized
service center to avoid risk.
AVOID AWKWARD OPERATIONS AND HAND POSITIONS where a sudden slip could cause your hand to move
into the cutting tool.
MAKE SURE THE WORK AREA HAS AMPLE LIGHTING to see the work and that no obstructions will interfere with safe
operation BEFORE performing any work using the saw.
ALWAYS TURN OFF SAW before disconnecting it, to avoid accidental starting when reconnecting to power
supply.
THIS TOOL should have the following markings:
Wear eye, hearing, and breathing protection.
Use splash hood for every operation for which it can be used.
Disconnect saw before servicing, when changing cutting wheels, and cleaning.
Use tool only with smooth edge cutting wheels free of openings, grooves, and teeth.
Replace damaged cutting wheel before operating.
Do not fill water bath above water fill line.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use to instruct other users. If you loan someone
this tool, loan them these instructions too.