1280-009
8V CORDLESS MINI ROTARY TOOL KIT
2
ELECTRICAL SAFETY WARNINGS
WARNING! When using power tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, personal injury and material damage.
Before operating the unit, carefully read the entire manual and be certain you know how
to switch the unit off in case of an emergency. Be sure to save these instructions and any
other documents supplied with this unit for future reference.
Note:
The power outlet used for the power tool/charger must be protected by a 30mA
ground fault circuit interrupter or earth leakage circuit breaker. If the supply cord is
damaged, it must be replaced by an electrician or a power toll repairer in order to avoid
a hazard.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in
the warnings refers to your mains operated (corded) power tool or battery operated
(cordless) power tool.
WORK AREA SAFETY
•
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
•
Keep children and bystanders away while operating a power tool.
Getting distracted
while using the tool may lead to injury for the operator or bystanders if not exercising
proper safety.
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and
matching outlets will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
•
Do not expose power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or
entangled cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for outdoor
use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
•
If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply with a rated leakage current of 30 mA or less.
Use of a GFCI reduces the risk of electric shock.
Summary of Contents for 1280-009
Page 18: ...17 ...
Page 19: ...1280 009 8V CORDLESS MINI ROTARY TOOL KIT 18 ...
