8
1249-998
Do not remove the soft paper in the centre of the grinding disc.
NOTE:
If this paper has been previously removed, insert some soft rubber or
paper between the grinding disc and the disc flange to prevent damage to the
grinding disc.
Do not alter or enlarge the centre hole of the grinding disc as this could result
in breaking it.
Do not over tighten the clamp nut on the grinding disc. Excessive tightening
may cause the disc to crack and possibly shatter during operation.
Do not use the grinder if the disc flange or clamp nut is missing or if the
spindle is bent.
Check to make sure the power cord and any extension cord are clear of the area to
be cut. Contact with ”live” wires could shock the operator or cause a fire.
Hold tool by insulated gripping surfaces when performing an operation where
the tool may contact hidden wiring or its own cord. Contact with a “live” wire
will make exposed metal parts of the tool “live” and shock the operator.
Always hold the grinder securely with two hands while working and at all times
when it is running.
Never turn the grinder ON with the grinding disc or any rotating parts
touching the work surface.
Never cover the air vents in the motor housing with your hands while operating
the grinder.
