RADLEY 1248-877, Owner'S Manual

Page: 12 / 21

11
Impact Wrench - Owner's Manual
ASSEMBLY AND OPERATING
INSTALLING IMPACT SOCKETS
WARNING: Use only impact sockets
and accessories that are designed for use with
an impact wrench. Do not use chrome plated
sockets and accessories. Chrome plated sockets
and accessories are designed for hand use only
and MUST NOT be used with a impact wrench.
They may shatter and possibly cause serious
injury.
WARNING: Always remove the plug from
the power source before changing any sockets
or accessories. You may injure your hand if the
tool is started accidentally.
To install a socket, press the square portion of
the socket (1) onto the square drive (2) of the
impact wrench (Fig. 1).
NOTE:
Slide the socket fully onto the square drive so
the socket retainer (3) will hold the socket firmly
in place.
FORWARD/REVERSE TRIGGER SWITCH
This impact wrench is equipped with a rocker
style forward/reverse switch (1) (Fig. 2).
1. To operate the impact wrench in the forward
direction, press and hold the bottom part of the
switch (2). The socket will rotate in a clockwise
direction to
tighten
the fastener.
NOTE: This tool includes a soft start feature to
improve control over the tool during the high
torque generated when the tool starts.
2. To operate the impact wrench in the reverse
direction, press and hold the top part of the
switch (3). The socket will rotate in a counter
clockwise direction to loosen the fastener.
Fig. 1
Fig. 2