RadiSwitch
®
Quick Start Guide
RadiSwitch
®
Quick Start Guide
How to configure the RadiSwitch® in RadiMation®
1. Start the latest version of RadiMation®;
Download the
latest version at: https://www.raditeq.com/radimation-download/.
2. Select the button ‘Device’ at the top menu bar, followed by clicking ‘Configure’;
3. In the configuration screen select ‘Device Drivers’ and Select ‘Switch matrix’ as driver type;
4. Click the ‘Add’ button to open the selection of available drivers in RadiMation®;
5. Enter ‘RSW’ in the search bar which will show all available RadiSwitch® drivers;
6. Select the correct driver, double click it (Optional, rename it) and press ‘OK’.
3
4
5
2
6
How to connect the RadiSwitch® to the RadiCentre®
1.
Select the recently added RadiSwitch® driver
2. Select ‘Advanced’
3. Click on the tab ‘RadiCentre®’
4. Under device identification select the RadiCentre® slot number
the RadiSwitch® plug-in card is installed in
5. When the correct slot number is chosen, continue to set the
communication of the RadiSwitch® by clicking ‘Ok’
4
3
5
•
Press the ‘status’ box to enter the control screen for an overview of the relay positions.
•
Press the buttons next to the relay to change the relay position.
•
Press ‘Config’ to enter the device configuration screen for more detailed configuration.
•
In case of a failure, an error will be displayed in the screen.
Manual Control
NOTE:
Depending on model, the display shows either one, two or four relays. Any external relay will be shown as a SP6T x2.
Additional information
More information can be found in the RadiSwitch® manuals which can be downloaded at:
https://www.raditeq.com/raditeq-downloads/
