RadiSys EPS-6315, Hardware Reference Manual, Page: 35 / 123

Chapter 4: BIOS configuration
25
Main Setup menu
Figure 4-1. BIOS Main Setup menu
Main
F1 Help
↑↓
Select Item –/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
System Time: [16:17:18]
System Date: [01/01/2002]
Primary Master [None]
Primary Slave [None]
System Memory: 640 KB
Extended Memory: 524288 KB
Advanced Boot Exit
PhoenixBIOS Setup Utility
Main
<Tab>, <Shift-Tab>, or <Enter>
selects field.
Item Specific Help
The far right menu in the menu bar is the Exit Menu. Use the options in the Exit
menu to save your changes, re-load default BIOS settings, and so on. Press the ESC
key to go immediately to the Exit Menu.
The fields in each menu and sub-menu are explained below. Additional help
information is available in the help area on the BIOS setup screen.
Field Description
System Time/System Date Sets the system time and date. To change these values, go
to each field and enter the desired value. Press the tab key to
move from hour to minute to second, or from month to day
to year.
The default system time is 00:00; the default date
is 01/01/1998.
Primary Master sub-menu Displays a menu that you use to enter information for the
master IDE drive connected to the primary IDE controller.
For more information, see
Primary Master/Slave
sub-menus on page 27.
Primary Slave sub-menu Displays a menu that you use to enter information for the
slave IDE drive connected to the primary IDE
controller.For more information, see
Primary Master/Slave
sub-menus on page 27.