RadiSys EPC-26A/27, Manual

Page: 77 / 86

Appendix E: Formattig Flash and SRAM
Page E9
E E
Error Message SLOT NUMBER OUT OF RANGE
Explanation The EXM slot number listed does not contain a
flash/SRAM.
Resolution Ensure that the EXM slot specified contains Flash/SRAM.
Error Message SRAM FILE SYSTEMS ARE NOT BOOTABLE. DO
NOT SPECIFY THE /S OR /B PARAMETERS
Explanation XFORMAT does not create bootable SRAM disks.
Resolution Remove the /S , /N or /B flag.
Error Message SYSTEM DOES NOT CONTAIN ONBOARD FLASH
Explanation /T=O was specified for a system that does not contain
onboard flash (flash on the CPU card).
Resolution Repeat the command without the /T=O option.
Error Message
TARGET SIZE NOT SPECIFIED
Explanation The /F option is ill-formed.
Resolution The syntax for the /F flag is /F<filename> <size> . The
filename is specified and is followed by the file size in
kilobytes.
Error Message
UNABLE TO INITIALIZE FLASH DEVICE
Explanation XFORMAT has determined that no flash memory exists.
Resolution Check that the system is properly connected to a +12V
power supply.
Error Message
UNABLE TO READ BOOT RECORD FILE
Explanation The boot record files are not in the <srcdir> path.
Resolution Copy the boot record files to the proper directory
Error Message UNABLE TO READ SRAM DRIVE
Explanation The SRAMDISK.SYS driver cannot read SRAM memory.
Resolution Ensure the SRAM disk is formatted. The OB1 option byte
must be enabled via the EXM Setup Screen.
Error Message UNRECOGNIZED FLAG
Explanation A mis-spelled or illegal flag was used.
Resolution Check the command line to ensure only legal flags are used.