RadiSys ATCA-5400 RTM, Reference

Page: 6 / 38

6
Where to get more product information
Please visit the RadiSys Web site at www.radisys.com for product information and other
resources. Downloads (manuals, release notes, and software) are available at
www.radisys.com/downloads .
Related Promentum manuals
The following manuals are available to help you use the RTM and the CPM:

Installation and initial setup instructions. The ATCA-4500 Compute Processing Module
Installation Guide provides the steps for installing the CPM and RTM into a shelf and
completing the initial configuration.

Hardware reference information. The ATCA-4500 Compute Processing Module Reference
describes the module’s hardware features and operation. It also contains information on the
main BIOS configuration, Intelligent Platform Management Interface (IPMI) commands, and
troubleshooting.
Standards information
For information about the PCI Industrial Computer Manufacturers Group (PICMG) and the
AdvancedTCA standard, consult the PICMG Web site at this URL:
http://www.picmg.org
Other related documents
CAN/CSA C22.2 No. 60950-1-03 Safety for Information Technology Equipment, Version 2
,
Canadian Standards Association ( www.csa.ca ), April 1, 2003
EN 60950-1:2002 Information Technology Equipment. Safety. General Requirements,
European Committee for Electrotechnical Standardization (CENELEC) ( www.cenelec.eu ),
February 22, 2002
IEC 60950-1 Information Technology Equipment - Safety - Part 1: General Requirements , 1st
Edition, International Electrotechnical Commission (www.iec.ch), October 25, 2001
Information Technology - Serial Attached SCSI - 1.1 (SAS-1.1) , ANSI/INCITS 417-2006
Integrated RAID for SAS User’s Guide , LSI Logic
®
Corporation
LSISAS1064E PCI Express to 4-Port Serial Attached SCSI, LSI SAS1064E Revision 2.3 , LSI Logic
Corporation, November 2007
Intelligent Platform Management Interface Specification v1.5, Revision 2.0, Intel Corporation;
Hewlett Packard Company, NEC Corporation, and Dell Computer Corporation
PICMG 3.0 Advanced Telecommunications Computing Architecture R3.0 , PCI Industrial
Computer Manufacturers Group, March 24, 2008
PICMG 3.1 R1.0 Specification, Ethernet/Fibre Channel for AdvancedTCA Systems , PICMG,
January 22, 2003