5.2 System configuration
[2.SYSTEM SETUP MENU.]
A.Set Device Name [ DEVICE-d880393e05ed]
B.Set Destination of HTTP[ TAPACULO365 ]
C.Set HTTP Update Interval [ 5 Min.]
G.Set FND Display Mode [ CH1&CH2 ON ]
H.Set Debug Print [ OFF ]
Q.Quit.
A.
Change the name of the device. The default value is "Device-MAC address."
B.
Select the transmission protocol for the data gathered. You can choose from TAPACULO365 and
CUSTOMER SERVER. Use the Customer Server setting in case the server has been developed
by the user.
C.
Select the data transmission frequency. It can be configured every minute (minimum).
D. Choose whether to use the LED display on the front or not to. Both CH1/CH2 can be set ON or
OFF.
5.3 Channel alarm setting
[3.BUZZER&SIREN SETUP MENU.]
A.Set Alarm Trigger Mode [ CH1 OR CH2 ]
B.Set Alarm CH1 Min [
0.00 ]
C.Set Alarm CH1 Max [
0.00 ]
D.Set Alarm CH2 Min [
0.00 ]
E.Set Alarm CH2 Max [
0.00 ]
F.Set BUZZER Alert Enable [ SOUND ON ]
G.Set Remote SIREN DEVICE Enable [ OFF ]
(QLIGHT MODEL:ST56EL-ETNS-2-WS)
H.Set Remote SIREN DEVICE IP [ 192.168.1.111]
I.Set Remote SIREN DEVICE Port [ 2000 ]
Q.Quit.
A. Select the channel to use the alarm. The available channels are NOALRAM, CH1, CH2, CH1 AND
CH2, and CH1 OR CH2.
B.
Input the Min value of Channel 1.
C.
Input the Max value of Channel 1.
D. Input the Min value of Channel 2.
E.
Input the Max value of Channel 2.
F.
Choose whether to use the internal buzzer in the RN171 or not to (SOUND ON/OFF).
G. Turn the remote alarm lamps (siren) ON/OFF.
The alarm lamp model supported is ST56EL-ETNS-2-WS by QLIGHT CO. LTD.
H. Input the IP of the remote alarm lamp.
I.
Input the port of the remote alarm lamp.
©2019 DEKIST Co., Ltd. www.radionode365.com
Rev. 1.9